M&A Engineering Ltd - Re-location & Development Progress Page

We have just started our expansion and re-location project.

Obviously we are excited about this expansion program and thought it would be a good idea to show our valued customers the development progress as things happen. This new venture will allow us to offer a broader and better service to our clients and these details will be added to this page towards the end of the second phase. In the meantime, we will add some progress pictures with some progress comments.

The first and second phase of development will include the design and build of a bespoke building which will allow us to offer a much more elaborate in-house machining capacity; along with a much bigger physical preparation capacity for our in-situ machining service. Our new office and workshop will be approximately 10,000 sq ft, and the workshop area will be serviced by an overhead twin beam 10 Ton crane with a 5 metre lift capacity.

The (first and second phase) building has been designed and planning approved and our 3D image of the complex is below.

Full access for loading and unloading of a 45ft trailer can easily be accommodated within the workshop.

This large first and second phase development building will be set within 1.7 acres of land, which will allow adequate further area for our third phase expansion which will occur within 1 - 2 years after completion of the second phase.

View from development area - looking West

The first day - Tuesday 16th June 2008
It is estimated that some 45,000 Tonnes of soil/sub-soil/stone will be handled in order to level the site.

One month on; and approximately 50% of work is completed to level the site.

A continuous flow of six 20T lorries is now permitting the removal of 1000 - 1300 Tons per day!

General view of project area - 17th July 2008.

Please re-visit from time to time to view site up-dates.